Flue Pipes

RITE-VENT PRIMA PLUS 1mm

Prima Plus 1mm is a high quality 316L stainless steel single wall flue system. It is specifically designed for connecting solid fuel appliances to existing brick stacks or a twin wall stainless steel chimney. It provides internal fluing of domestic woodburning, coal and multi-fuel stoves and boilers with normal operating temperatures up to 540°C and short firing up to 760°C. It can also be used for lining brick stacks for gas, oil, multi-fuel appliances and open fires as an alternative to flexible liner.

With the addition of a gasket to the joint, Prima Plus is also designed for flueing condensing gas and oil appliances with positive pressures up to 200Pa, continuous operating temperatures up to 160°C and short firing up to 200°C

• 316 1mm stainless steel single skin construction
• For use as a connecting flue pipe and liner
• Residential and commercial installations
• Multifuel applications
• Diameters from 100mm to 300mm
• CE Approved EN 1856-2 Designation T600 N1 D V3 L50 G400<

PRODUCT DESCRIPTION

• Advanced corrosion-resistant design and construction using 1mm 316L continuously-welded stainless steel. The only stainless steel system to have passed the internationally-recognised GASTEC corrosion test.
• Engineered-tolerance joint simply push-fits together giving exceptional load bearing capacity. Optionally, a locking band can be fitted for extra joint security
• Inward bead on the male joint spigot acts as a capillary break preventing moisture being drawn through the joint
• Adjustable 0-90° elbows quickly solve alignment problems on installation of flue runs
• Can be painted if required
• For condensing appliances a gasket is fitted to the inward bead of the male joint
• Use as an alternative to vitreous enamelled flue pipes

VITREOUS ENAMEL FLUE PIPE

Vitreous enamel flue pipe is designed for internal use up to 1.8 metres from the heating appliance to connect up with the chimney, liner or twin wall chimney system and provides a neat, attractive and highly durable flue system. As a result of high quality manufacturing techniques, vitreous enamel flue is suitable for use on gas, oil, solid fuel and wood burning appliances with flue gas temperatures up to 750°C.

PRODUCT DESCRIPTION

• Jointing is by spigot and socket, the socket being formed integrally with the section. (This is the most practical and tested method to cater for all flue conditions) Install with the socket uppermost and seal with a proprietary fire cement
• Manufactured under ISO 9000 quality assurance scheme satisfying Building Regulations approved document.
• Manufactured and approved to BS 6999:1989
• Vitreous enamelling to Class SA when tested and assessed to BS. 1344: Part 3.1988, ISO 8290 1987

Available in matt and gloss black, brilliant white and other colours to order

TWIN WALL SYSTEM

*please note that all twin wall systems are quoted on an individual basis so prices are not shown on the flue price list*

POUJOULAT TI/ZI

The THERM-INOX flue range is suitable for the evacuation of fumes from any gas, oil, wood and coal-fired appliances. With the addition of a seal, they can also be used under positive pressure (P1) and for horizontal condensing applications. Incorporating a 30 mm thick insulation of high density pressure injected mineral fibre, these twin wall stainless steel or stainless / aluzinc + steel chimneys are now CE marked in compliance with the new BSEN 1856-1 for chimneys.

• TI - 316 inner/304 outer stainless steel twinwall insulated
• ZI - 316 inner stainless/zalutite outer twinwall insulated
• Internal and external usage - ZI Internal only
• All fuels - including condensing with optional seals
• Residential and commercial installations
• 30mm insulated cavity
• Diameters from 80mm to 600mm
• CE approved EN 1856-1
• No Seals T450 N1 D V2 L50040 G50
• With Seals T250 P1 W V2 L50040 O20

PRODUCT DESCRIPTION

• Independent expansion of internal liner.
• Top thermal performance, rapid stabilisation of flue gas temperature and system draught.
• Joint design permits 360° rotation whilst maintaining full operational integrity.
• Freestanding 3m terminal section of chimney.
• Joint seal provides pressure resistance up to 200 Pa at a temperature of 250°C, plus full condensing capability for horizontal flue.
• Multi fuel applications up to 450°C.
• Continuity of diameter with non overlapping locking bands.
• Optional finish paint to RAL Colours.